The “Improvise. Adapt. Overcome.” mindset can be very helpful, but sometimes you simply need a device that works and solves the problem without additional tinkering. The CCR2004-1G-12S+2XS does just that – forget about all connectivity troubles and expand your setup in any way you please. This handy router features 12 x 10G SFP+ and 2 x 25G SFP28 ports.

Mikrotik CCR2004-1G-12S+2XS is our router with the most powerful single-core performance so far. It provides incredible results in single tunnel (up to 3.4 Gbps) and BGP feed processing.

Be prepared for anything: 10G, 40G and now 25G! Paired with such MikroTik multiport products as CRS317-1G-16S+RM, CRS312-4C+8XG-RM and CRS326-24S+2Q+RM, your networking setup will know no bounds. Performance-wise, CCR2004-1G-12S+2XS is on par with the renowned CCR1009/CCR1016 routers. And with dual redundant power supply you can forget about unexpected downtime! With its elaborate port configuration, the new CCR2004-1G-12S+2XS is the perfect addition to any professional networking arsenal – it will save you tons of time in some tricky situations! Size of RAM in RouterOS v6 1792MB ECC / RouterOS v7 4GB ECC

Product Manual

HARDWARE SPECIFICATIONS:

Details
Product code	CCR2004-1G-12S+2XS
Architecture	ARM 64bit
CPU	AL32400
CPU core count	4
CPU nominal frequency	1700 MHz
Dimensions	443 x 224 x 44 mm
RouterOS license	6
Operating System	RouterOS
Size of RAM	4 GB
Storage size	32G, 64G, 128G
Storage type	NAND
MTBF	Approximately 200'000 hours at 25C
Tested ambient temperature	-20°C to 60°C
IPsec hardware acceleration	Yes

Ethernet test results

CCR2004-1G-12S+2XS		AL32400 all port test
Mode	Configuration	1518 byte		512 byte		64 byte
		kpps	Mbps	kpps	Mbps	kpps	Mbps
Bridging	none (fast path)	3248	39444	6421	26300	11552	5915
Bridging	25 bridge filter rules	1774	21543	1815	7434	1736	889
Routing	none (fast path)	3231	39237	6344	25985	10322	5285
Routing	25 simple queues	2214	26887	2277	9327	2259	1157
Routing	25 ip filter rules	1096	13310	1108	4538	1136	582

1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

 

IPsec test results

CCR2004-1G-12S+2XS		AL32400 IPsec throughput
Mode	Configuration	1400 byte		512 byte		64 byte
		kpps	Mbps	kpps	Mbps	kpps	Mbps
Single tunnel	AES-128-CBC + SHA1	303.6	3400.3	353.6	1448.3	354.7	181.6
256 tunnels	AES-128-CBC + SHA1	302.0	3382.4	378.8	1551.6	376.4	192.7
256 tunnels	AES-128-CBC + SHA256	302.0	3382.4	378.8	1551.6	376.4	192.7
256 tunnels	AES-256-CBC + SHA1	300.3	3363.4	374.5	1534.0	374.5	191.7
256 tunnels	AES-256-CBC + SHA256	300.3	3363.4	374.5	1534.0	374.5	191.7

1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

 

 

1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results.

• Medium Enterprise
• Data Center
• Enterprise